In the process of using the empty container front crane, there is no action when operating the spreader, so how should we deal with it? Let's follow the small make-up to learn more about it!
1. We need to check the emergency stop button. Sometimes the operator will accidentally touch the emergency stop button of the front crane of the empty box, then the spreader will not act.
2. Check whether the action solenoid valve is powered on. For the empty container front crane equipped with lifting appliances, we can judge whether the solenoid valve is powered on by observing whether the indicator light on an action solenoid valve can be on. If all of our action solenoid valves are not powered on, it may be that the total fuse of the relevant circuit of the spreader control is blown out. Check whether the master fuse is blown. If the naked eye can not accurately judge whether the fuse is broken, it needs to be tested by a multimeter.
3. Check section by section with multimeter. If the solenoid valve is not powered on just for a certain technical action, it may be that the hydraulic handle button of the internal control of the action or the related circuit of the control fails. If the on-off of the working circuit is checked section by section with a multimeter, it is easy to find out the fault location.
To sum up, this is about the troubleshooting method when the spreader does not move during the use of the empty container front crane. I hope you can learn more after reading the above introduction. In the process of use, if there is a fault is also a relatively common problem, we must calm down and do a good job of emergency treatment.